How To Maintain The Concrete Mixer?

1 Maintain the body clean and remove dirt and obstructions from the body.

2 Check the oil and circuit and control equipment at each lubrication point and fill the oil as required.

3 Before each shift, add water to the mixing drum for 1 to 2 minutes, and check the reliability of the clutch and brake device.

4 During the operation of the concrete mixer, the noise of the motor, reducer and transmission gear should be checked at any time, and the temperature rise is too high.

5 After the end of each shift, the concrete mixer should be carefully cleaned.

6 In order to ensure its technical performance, it must be noted that in the repair and transformation, it must be shoddy. High-quality bearings must be used