2024-05-17
Foam concrete blocks, there are numerous within this is a bubble of light brick, can float in the water, the academic name of aerated concrete blocks, commonly known as the aerated brick. Foam concrete blocks because they do not use clay, removed from the recording process, so energy-saving emission reduction, a major source of new wall materials to promote the use of.
Aerated brick in the market for more than 10 years of production history, its production process are: sand, lime, cement and fly ash according to the proportion of science, raw materials shall be ground to a powder by churning after foaming, cemented earlier poured onto molds, and is formed by cutting and conservation.
As foamed concrete block with insulation, heat insulation, sound insulation, light, fire and so on, its use particularly extensive, can be used both inside and outside of the frame structure filler wall; reconstruction of old buildings, houses and brick; higher insulation requirements of plants, cold storage and other building materials and insulation materials. Foam concrete block production process of the waste can be recycled or used to fill potholes, Foundation.
Foam concrete block is different from the red-brick, red brick hard, with an average density less than water, dry capacity of 500-800 kg/sq m, is 1/4 of the ordinary concrete, clay brick 1/3, 1/2 of Hollow bricks, can float on water. Comparing the use of solid clay brick (brick), can reduce the cost, reducing sections of the framework, for more than 7-storey buildings, cost can be reduced by over 5%. Foamed concrete block with brick walls, brick is light enough, during the construction phase can reduce labor intensity of handling, in particular, vertical transportation, to speed up construction. Also thanks to aerated brick is light enough, makes the building's load-bearing small, earthquake resistance is increased.